The AgPro Silage Trailer holds over 80 Cubic Yards
Silage Trailer comes standard 36 feet long with 6 1/2 Foot Walls and 18” removable
Expanded Metal Extensions. Two support stringers 12 and 24 feet back from the front give the trailer greater strength and stability.
50,000 Lb Hutchins Spring Suspension
is standard and an Air Bag Option will soon be available. Axles are set forward allowing the trailer to back over the table of a bagger.
Manual Flow Control Valve gives the operator the ability to adjust floor speed for unloading in controlled conditions. The top is squared out to make it possible to add an automatic tarp. Hinged from the top, the back door latches into the floor chain in 4 spots. Once the trailer is unloaded the driver merely pulls forward and touches the brakes to swing the door closed. The trucks wet kit provides power for the floor chain. The trailer weights 16,000 pound empty.
The AgPro Silage Trailer Final Drive Shaft is 2¼ Stress Proof Shaft with welded on Sprockets and is attached with 4 Steel Bushing Blocks containing Greaseable Nylatron Bushings. The Final Drive Shaft can be replaced in less than an hour. Two Char Lyn Model 104 Motors power the Final Drive Shaft from both sides. 80H Heavy Chain transfers the torque from the motors to the shaft. The Floor Apron Chain is made with American Drive D667KC Chain and plasma cut 3/16 Slats that are formed to the chain for maximum strength. To ease unloading the box is a FULL 102” WIDE outside and the walls are Tapered Front to Back. The Silage Trailer is 2 ½” Wider at the back compared to the front. As the Floor Chains move the load the wall tapers away to reduce friction and drag. This means less power is needed to move the load and less stress on the floor chains. An Integrated Bumper with LED Lighting comes standard. The skirt is formed 7 gauge with 10 gauge Steel floor.
SUPERIOR METAL CONSTRUCTION
MEANS YEARS of DURABILITY and SERVICE.
UNITS ARE IN STOCK READY FOR DELIVERY